TIE/rc Starfighter

From TheHolo.Net Forums Wiki

Revision as of 20:15, 26 April 2013 by Reshmar (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to:navigation, search
TIE/rc Starfighter
TIErc.jpg


Class
TIE/rc Starfighter
Manufacturer
Sienar Fleet Systems
Designation
Reconnaissance, Fighter
Length
6.3 meters
Crew
1
Passengers
None
Speed
96 MGLT
Acceleration
20 MGLT/s
Maneuverability
100 DPF
Hyperdrive
Hull
15 RU
Shields
None
Weapons
(1) Laser Cannons
Hangar
None
Cargo
65 kg
Consumables
2 Days
Affiliation










The TIE/rc starfighter was a variant of the standard TIE/LN starfighter that was specialized for reconnaissance, used for scouting for both fleets and for starfighter wings.

Design

The TIE/rc carried enhanced sensors that allowed it to range ahead of the main force and relay pre-engagement reconnaissance data back with its improved communication equipment. These small ships were often deployed in crowded areas where larger vessels could not operate (e.g. asteroid fields), or were sent to scout ahead for starfighter forces. Standard procedure for long-range TIE reconnaissance missions involved the carrying vessel dropping a TIE/rc squadron into a system, then jumping to hyperspace, ensuring its safety. The TIEs would race through the system, gathering data, before meeting the carrier at a rendezvous point elsewhere in the system. One of the two laser cannons found on the TIE/LN was replaced with additional sensor and communications gear in the TIE/rc. Although the TIE/rc was not as well armed, it had upgraded thrusters which made it more maneuverable than the TIE/LN.