View source for RZ-1 A-Wing Interceptor

From TheHolo.Net Forums Wiki

Jump to:navigation, search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page:

{{Infobox_Ship_Class
| Title=RZ-1 A-Wing Interceptor
| Image=A-Wing.jpg
| Class=RZ-1 A1a Interceptor
| Manufacturer=Alliance Underground Engineering<br>Mon Calamari Shipyards
| Designation=Interceptor Starfighter
| Length=9.6 meters
| Crew=1
| Passengers=None
| Speed=120 MGLT
| Acceleration=28 MGLT/s
| Maneuverability=96 DPF
| Hyperdrive= Class 1.0
| Hull=14 RU
| Shields=50 SBD
| Weapons=(2) Laser Cannons<br>(2) Concussion Missile Launchers<br>Sensor Jammer
| Hangar=None
| Cargo=40 kg
| Consumables=1 Week
| Affiliation=[[Rebel Alliance]]
}}

==Design==
Developed by senior Rebel Alliance officer Jan Dodonna and former [[Kuat Systems Engineering]] designer Walex Blissex, the '''RZ-1 A-Wing Interceptor''' was intended to be a means to overcome certain performance discrepancies between Rebel and Imperial craft. Though the [[T-65B X-Wing Starfighter]] was a formidable craft, and its shields and hyperdrive gave it a decisive advantage over the Imperial [[TIE Fighter]], the fighter lacked the speed and agility of the enemy craft. The Rebellion had lost the majority of its fighters during the Battle of Yavin, and arrogance had been the only thing preventing the Death Star from launching its full compliment of fighters. Dodonna wanted a Rebel fighter that was capable of outflying a TIE Fighter, rather than just relying on its shields. Thus, the A-Wing was born.

Using the [[R-22 Spearhead]] starfighter - already nicknamed the "A-Wing" to conform with other Rebel -wing fighters - as a test-bed, [[Dodonna & Blissex]] concentrated mostly on improving the propulsion systems, increasing raw speed, acceleration, and maneuverability. Thrust for the new fighter was provided by a pair of J-77 Event Horizon engines. To allow the craft to perform well in atmospheric combat, guidance surfaces were incorporated into the design, and the aerodynamics of the hull were also improved.

The weapons systems also recieved a great deal of attention. Maneuverability was the TIE Fighter's key advantage, allowing the Imperial fighters to turn tighter than their Rebel contemporaries. A system was devised to allow the laser cannons mounted either side of the fuselage to be angled up to sixty degrees above or below the fighter's plane of flight: the fighter itself might not be able to turn as sharply as a TIE could, but it guns would be able to make up the difference. The fighter also carried an advanced electronic countermeasures package to jam Imperial sensors, helping to protect the A-Wing from missile locks and from detection during the initial stages of combat.

The prototype fighter proved to be extremely successful, and was quickly rolled out into service. Unfortunately, in the wake of the Battle of Yavin the Alliance lacked a central production facility at which they could construct the A-Wing fighters. Dodonna & Blissex devised a means whereby the fighter could be constructed from a variety of available components, allowing smaller facilities and even active Squadrons to construct new A-Wings in-house. Unfortunately, because each fighter was built on an individual basis rather from stock parts, the fighters tended to vary considerably from each other, which caused all manner of logistical problems.

Following the liberation of Mon Calamari, the Alliance gained access to the [[Mon Calamari Shipyards]]. An infrastructure to produce A-Wing fighters was established there, allowing for a "standard" A-Wing to be produced. However, with the Alliance still struggling to acquire the supplies and resources necessary, initial production was slow and by the Battle of Endor the Alliance lacked enough servicable squadrons to mount a significant A-Wing presence during the assault on the second Death Star.

After the death of the Emperor production began to increase as parts became more easily accessable, but by then the A-Wing was already outdated: the [[TIE Interceptor]] had been fielded by the Empire not long after the A-Wing entered service, and by the Battle of Endor it accounted for 20% of the Imperial Starfighter Corps. To increase the survival rate of A-Wing pilots, a Mark II A-Wing - the [[RZ-2 A-Wing Interceptor]] - was developed with the help of [[Incom]] engineers to try and close the performance gap once again.
<br>
==Known Squadrons==
'''Rebel Alliance'''
* [[Viper Squadron]]
* [[Prowler Squadron]]
* [[Valkyrie Squadron]] (currently flying [[RZ-2 A-Wing Interceptor|RZ-2 A-Wings]])
* [[Thunderbolt Squadron]] (currently flying [[RZ-2 A-Wing Interceptor|RZ-2 A-Wings]])
<br>


[[Category:Star Wars Ships (by Class)]] [[Category:Alliance Starfighters]]

Templates used on this page:

Return to RZ-1 A-Wing Interceptor.

Retrieved from "https://theholo.net/wiki/index.php/RZ-1_A-Wing_Interceptor"

wiki

Toolbox

Namespaces

Variants

Views

Actions

Search

View source for RZ-1 A-Wing Interceptor

From TheHolo.Net Forums Wiki